Find link

language:

Find link is a tool written by Edward Betts.

Longer titles found: Tool steel 1.2344 (view)

searching for Tool steel 67 found (181 total)

alternate case: tool steel

Anvil (2,746 words) [view diff] exact match in snippet view article find links to article

as they deform and lack rebound when struck. The largest single piece tool steel anvil that is heat treated is 1600 pounds. This anvil was made in 2023

Bedrock plane (695 words) [view diff] exact match in snippet view article find links to article

much thicker, which means more material to remove, and are 100 percent tool steel, hardened to about Rockwell 62. Of course, these are priced at multiple

Böhler-Uddeholm (224 words) [view diff] exact match in snippet view article find links to article

Böhler-Uddeholm is an Austrian company specialized in producing tool steel and special forgings. It was formed in 1991 as a result of a merger between

Ordnance Factory Muradnagar (909 words) [view diff] exact match in snippet view article find links to article

hardware and moulds and open die steel forgings for Hot die steel and other tool steel. It supplies castings for aerial bombs, track assembly for T-90 tank,

Ion implantation (4,211 words) [view diff] exact match in snippet view article find links to article

matches that of the silicon. Nitrogen or other ions can be implanted into a tool steel target (drill bits, for example). The structural change caused by the

Metal spinning (988 words) [view diff] exact match in snippet view article find links to article

often foot long hollow bars with tool steel shaped/sharpened files attached. In CNC applications, carbide or tool steel cut-off tools are used. The mandrel

Spatula (619 words) [view diff] exact match in snippet view article find links to article

during the performance of repair treatments. They are made of stainless or tool steel and are available in a wide variety of shapes and sizes. "Lab Spatulas

Barrett M99 (519 words) [view diff] exact match in snippet view article find links to article

trigger design, heat-treated steel M1913 rail, match grade barrel, and S-7 tool steel bolt. It has three quick assembly pins, allowing it to be assembled or

Aerospace bearing (329 words) [view diff] exact match in snippet view article find links to article

commercial, private, military, or space applications. Materials include M50 tool steel (AMS6491), carbon chrome steel (AMS6444), the corrosion resistant AMS5930

Swedish Mauser (3,468 words) [view diff] exact match in snippet view article find links to article

Germany or Sweden, were fabricated using a Swedish-supplied high grade tool steel alloyed with nickel, copper, and vanadium, a product then noted for its

Guncrafter Industries Model No. 1 (470 words) [view diff] exact match in snippet view article find links to article

heat-treated forgings, and the Model No. 1's hammer and sear are machined from tool steel. In 2006, Guncrafter Industries introduced its 1911 Model No. 2, which

Spin casting (1,523 words) [view diff] exact match in snippet view article find links to article

molding Mold material Vulcanized rubber Machined tool steel Machined aluminum, brass or tool steel Casting material Zinc, tin, lead, pewter, thermoset

Lineman's pliers (777 words) [view diff] exact match in snippet view article find links to article

They may be forged out of alloyed or unalloyed tool steel. For basic quality pliers unalloyed tool steel with a relatively low carbon content of 0.45%

Lucchini RS (813 words) [view diff] exact match in snippet view article find links to article

of Acciai Brianza, giving life to Lucchini Tool Steel, active in the processing and marketing of tool steel. The new acquisition was part of the industrial

Die cutting (web) (714 words) [view diff] exact match in snippet view article

tolerance and are machined out of a solid steel bar normally made out of tool steel. Adjustable dies have removable blades that can be easily replaced with

Elliott Cresson Medal (365 words) [view diff] case mismatch in snippet view article find links to article

Taylor Engineering Process of Treating Tool Steel 1902 Maunsel White Engineering Process of Treating Tool Steel 1903 G. H. Clam Engineering Method of eliminating

Kershaw Knives (947 words) [view diff] exact match in snippet view article find links to article

different steels in the same blade was introduced. The blade steels were D2 tool steel at the cutting edge, and a spine of 154CM stainless steel. In 2009 Kershaw

Vickers (1,688 words) [view diff] exact match in snippet view article find links to article

competitor Armstrong, as early as 1870. After a decline in lucrative tool steel demand in the US during the first half of 1880s, the stockholders logically

Cold Steel (company) (989 words) [view diff] exact match in snippet view article

carbon, SK-5 carbon steel, AUS 8A & 10A, CTS XHP, CPM S35VN, and CPM 3V tool steel. Cold Steel's folding knives are renowned for their lock strength, due

Survival knife (1,231 words) [view diff] exact match in snippet view article find links to article

metal, such as stainless steel in the case of the Aitor Jungle King I, or tool steel as used in the Chris Reeve One-Piece line. Makers like Lile, Strider,

Kennametal (886 words) [view diff] exact match in snippet view article find links to article

in the late 1930s. It was described as "much harder than the hardest tool steel," which enabled high-rate steel cutting not possible previously. In July

Top Fuel (4,501 words) [view diff] exact match in snippet view article find links to article

camshaft is billet steel, made from 8620 carbon or S7 through-hardened tool steel or similar. It runs in five oil pressure lubricated bearing shells and

12.7 × 108 mm (1,061 words) [view diff] exact match in snippet view article find links to article

09 oz) and travels at ~800 m/s (2,600 ft/s). Bullet consists of hardened tool steel tip and lead body. Able to defeat lightly-armored vehicles at 1,500 m

Punching (1,120 words) [view diff] exact match in snippet view article find links to article

shaped holes. Punches and dies are usually fabricated from conventional tool steel or carbides It creates a burnished region roll-over, and die break on

Cylindrical grinder (1,595 words) [view diff] exact match in snippet view article find links to article

shaft and needle bars of the sewing machine must be crafted from hardened tool steel. It was this desire that led to their experimentation with building a

Permanent mold casting (1,545 words) [view diff] exact match in snippet view article find links to article

produce but have short mold lives. On the other hand, molds made from H13 tool steel may have a mold life several times greater. The pouring temperature is

Physical vapor deposition (1,868 words) [view diff] case mismatch in snippet view article find links to article

1016/j.cossms.2017.11.001. ISSN 1359-0286. S2CID 102671908. "UDDEHOLM TOOL STEEL FOR PVD COATINGS" (PDF). 2020. Anders, André, ed. (3 October 2000). Handbook

Cryogenic hardening (505 words) [view diff] exact match in snippet view article find links to article

1016/j.ijrmhm.2018.03.010. J.Y. Huang et al. Microstructure of cryogenic treated M2 tool steel. Material Science and Engineering A 339 (2003) 241-244.

Harry Brearley (1,137 words) [view diff] case mismatch in snippet view article find links to article

Analysis of Steel-works Materials H. Brearley (1911) The Heat Treatment of Tool Steel H. Brearley (1914) The Case-Hardening of Steel H. Brearley (1918) The

CQC-6 (2,447 words) [view diff] exact match in snippet view article find links to article

Hartsfield's knives are hard ground from differentially heat-treated A2 tool steel and are known for their distinctive chisel-ground blades. More accurately

Angel Rifles (783 words) [view diff] exact match in snippet view article find links to article

cut in the six o'clock position halfway along the action. A piece of tool steel was bedded in the stock and mated into the slot to form the recoil lug

Zaporizhzhia Foundry and Mechanical Plant (1,130 words) [view diff] exact match in snippet view article find links to article

from casting to machined parts. In May 1934, the sheet steel plant, the tool steel plant, the ferroalloys plant, the fireclay plant, and the RMZ (Repair

Ka-Bar (2,785 words) [view diff] exact match in snippet view article find links to article

was produced with the "Next Generation", but also a blade made from D2 tool steel for extra edge retention and slightly better corrosion resistance than

Jack Monroe (character) (3,062 words) [view diff] no match in snippet view article

stun-discs on each shoulder near the collarbone. These 6-inch (150 mm) tool-steel alloy discs could be thrown as projectile weapons. Monroe has extensive

Ball bearing (4,380 words) [view diff] exact match in snippet view article find links to article

including pulleys, gearboxes and jet engine shafts. Materials include M50 tool steel (AMS6491), carbon chrome steel (AMS6444), the corrosion resistant AMS5930

Saw (4,829 words) [view diff] exact match in snippet view article find links to article

guide system for use as a rip-saw. Most blade teeth are made either of tool steel or carbide. Carbide was harder and holds a sharp edge much longer. Band

Blanking and piercing (1,676 words) [view diff] exact match in snippet view article find links to article

section of the material. The dies and punches are needed to be made of tool steel to withstand the repetitious nature of the procedure. Perforating is a

Tube bending (2,212 words) [view diff] exact match in snippet view article find links to article

material being bent. Much of the tooling is made of hardened steel or tool steel to maintain and prolong the tool's life. However, when there is a concern

Forge welding (2,898 words) [view diff] no match in snippet view article find links to article

steel typically had a high carbon-content ranging from 0.8% (eutectoid tool-steel) to 0.5% (hypoeutectoid spring-steel). Forge welding has been used throughout

Arbor milling (851 words) [view diff] exact match in snippet view article find links to article

milling process (though it is in the feasible range). Although high speed tool steel has been used in the past it is quickly being replaced by carbide, ceramic

Mangalloy (1,987 words) [view diff] exact match in snippet view article find links to article

works in 1856, and used as much as 2-5 per cent in his self-hardening tool steel. Alexandre Pourcel, of the French Terre-Noire Cie., was able by the 1878

Wz. 35 anti-tank rifle (2,580 words) [view diff] no match in snippet view article find links to article

Mauser cartridge case known as the 7.92×94mm Patronen, and a special tool-steel cored bullet. Simultaneous to the development of the ammunition, a young

Sheet metal (3,734 words) [view diff] exact match in snippet view article find links to article

away from the die. It is used to curl a material of specific thickness. Tool steel is generally used due to the amount of wear done by operation. It is a

Headspace (firearms) (2,082 words) [view diff] exact match in snippet view article

tolerances, manufacturers supply Go/no go gauges. These gauges are pieces of tool steel, cut to precise lengths. They're shaped like cartridges so they fit in

Frederick Winslow Taylor (7,871 words) [view diff] no match in snippet view article find links to article

Roeber, Eugene Franz; Parmelee, Howard Coon (March 1909). "The High-Speed Tool-Steel Patent Decision". Electrochemical and Metallurgical Industry. 7 (3): 105–107

Steel grades (960 words) [view diff] exact match in snippet view article find links to article

standards Archived 2019-04-27 at the Wayback Machine Comparison of various tool steel standards General guide to the EN 10027 steel name and numbering systems

Mac Gargan (8,998 words) [view diff] exact match in snippet view article find links to article

with a cybernetically-controlled, seven-foot mechanical tail, with a tool steel articulated framework which can whip at 90 miles per hour. The tail has

Ernest Emerson (6,552 words) [view diff] exact match in snippet view article find links to article

Hartsfield's knives were hard ground from differentially heat-treated A2 tool steel and are known for their distinctive chisel-ground blades. More accurately

Magnetic particle inspection (2,361 words) [view diff] case mismatch in snippet view article find links to article

Conditioning Agents for Aqueous Magnetic Particle Inspection AS 5282 Tool Steel Ring Standard for Magnetic Particle Inspection AS5371 Reference Standards

Swiss Steel (922 words) [view diff] exact match in snippet view article find links to article

the Schmolz + Bickenbach Group became the world's largest producer of tool steel. The Group is also the world leader in the production of stainless long

Roksan Xerxes (2,757 words) [view diff] exact match in snippet view article find links to article

legacy Xerxes.10 and Xerxes.20 turntables. Main bearing spindle: hardened tool steel Roundess & concentricity: < 5 μm Length – diameter ratio: 11:1 Main bearing

Speeds and feeds (4,312 words) [view diff] exact match in snippet view article find links to article

calculation of cutting speed are: The material being machined (steel, brass, tool steel, plastic, wood) (see table below) The material the cutter is made from

Blade shearing (1,682 words) [view diff] exact match in snippet view article find links to article

improvements using a acetal bearing system fitted with superior wear resistant tool steel blades has greatly increased the longevity of the shears. Conventional

Hobby injection molding (915 words) [view diff] exact match in snippet view article find links to article

home enthusiasts to machine molds out of softer metals. Rather than P20 tool steel, most grades of aluminum can be machined into working molds capable of

Timeline of the Jimmy Carter presidency (1978) (13,831 words) [view diff] exact match in snippet view article

Carter signs Proclamation 4559, modifying the process of importing alloy tool steel into the United States. April 5 – President Carter announces the nominations

Pipe Cutting (476 words) [view diff] exact match in snippet view article find links to article

used. These comprise a clamshell or chain-mounted cutting head holding a tool steel and feed mechanism which advances the tool a set amount per revolution

Bethlehem Steel Lehigh Plant Mill No. 2 Annex (288 words) [view diff] case mismatch in snippet view article find links to article

and built as a surface preparation and finishing mill for the Alloy and Tool Steel Division at Bethlehem Steel's Lehigh Plant in Bethlehem. The 4.5 acres

Selective laser melting (6,986 words) [view diff] exact match in snippet view article find links to article

can include Ni based super alloys, copper, aluminum, stainless steel, tool steel, cobalt chrome, titanium and tungsten. SLM is especially useful for producing

Irene Beyerlein (882 words) [view diff] exact match in snippet view article find links to article

T.E Mitchell (January 2003). "Microstructure of cryogenic treated M2 tool steel". Materials Science and Engineering A. 339 (1–2): 241–244. doi:10

Corrosion engineering (6,204 words) [view diff] exact match in snippet view article find links to article

January 2008). High temperature tribological behavior of surface coated tool steel. Birks, N.; Gerald H. Meier; F. S. Pettit (2006). Introduction to the

Handloading (15,209 words) [view diff] exact match in snippet view article find links to article

have a ring of tungsten carbide, which is far harder and slicker than tool steel, carbide straight wall dies do not require lubrication, however bottle

Timeline of the Jimmy Carter presidency (1979) (19,152 words) [view diff] case mismatch in snippet view article

Limitations on the Importation of Certain Articles of Stainless Steel or Alloy Tool Steel (July 11, 1979) Department of Education Statement on House of Representatives

List of thermal conductivities (4,017 words) [view diff] case mismatch in snippet view article find links to article

52.7 51.9 List: Naeser, G. in TPRC I pp 1186–90, curves 81, 91 and 92 Tool Steel, 1.41% C, 0.23% Mn, 0.158% Si L Water Quenched 30.5 31.0 31.8 Tempered

James Henry Carpenter (3,783 words) [view diff] exact match in snippet view article find links to article

projectiles that could pierce such steel. A contract for a critical specialized tool steel was signed in May 1890. In June, Congress passed a commitment to increased

Rule based DFM analysis for forging (4,198 words) [view diff] exact match in snippet view article find links to article

of the same material. Forging dies are usually made of high-alloy or tool steel. Dies must be impact resistant, wear resistant, maintain strength at high

List of The Woodwright's Shop episodes (519 words) [view diff] exact match in snippet view article find links to article

"Tempered Steel" 2014 (2014) Peter Ross shows how to forge, weld and temper tool steel for cutting edges that stay sharp longer. 468 3413 "Woodwright! - The

List of Forged in Fire episodes (6,746 words) [view diff] exact match in snippet view article find links to article

Fenlon 4. Carl Oliver 42 8 "The Cinquedea" Signature blade (using mining tool steel) Cinquedea May 23, 2017 (2017-05-23) 1.18 Judges: J. Neilson, David Baker