Find link

language: af: Afrikaans als: Alemannisch [Alemannic] am: አማርኛ [Amharic] an: aragonés [Aragonese] ar: العربية [Arabic] arz: مصرى [Egyptian Arabic] as: অসমীয়া [Assamese] ast: asturianu [Asturian] az: azərbaycanca [Azerbaijani] azb: تۆرکجه [Southern Azerbaijani] ba: башҡортса [Bashkir] bar: Boarisch [Bavarian] bat-smg: žemaitėška [Samogitian] be: беларуская [Belarusian] be-tarask: беларуская (тарашкевіца) [Belarusian (Taraškievica)] bg: български [Bulgarian] bn: বাংলা [Bengali] bpy: বিষ্ণুপ্রিয়া মণিপুরী [Bishnupriya Manipuri] br: brezhoneg [Breton] bs: bosanski [Bosnian] bug: ᨅᨔ ᨕᨘᨁᨗ [Buginese] ca: català [Catalan] ce: нохчийн [Chechen] ceb: Cebuano ckb: کوردیی ناوەندی [Kurdish (Sorani)] cs: čeština [Czech] cv: Чӑвашла [Chuvash] cy: Cymraeg [Welsh] da: dansk [Danish] de: Deutsch [German] el: Ελληνικά [Greek] en: English eo: Esperanto es: español [Spanish] et: eesti [Estonian] eu: euskara [Basque] fa: فارسی [Persian] fi: suomi [Finnish] fo: føroyskt [Faroese] fr: français [French] fy: Frysk [West Frisian] ga: Gaeilge [Irish] gd: Gàidhlig [Scottish Gaelic] gl: galego [Galician] gu: ગુજરાતી [Gujarati] he: עברית [Hebrew] hi: हिन्दी [Hindi] hr: hrvatski [Croatian] hsb: hornjoserbsce [Upper Sorbian] ht: Kreyòl ayisyen [Haitian] hu: magyar [Hungarian] hy: Հայերեն [Armenian] ia: interlingua [Interlingua] id: Bahasa Indonesia [Indonesian] io: Ido is: íslenska [Icelandic] it: italiano [Italian] ja: 日本語 [Japanese] jv: Basa Jawa [Javanese] ka: ქართული [Georgian] kk: қазақша [Kazakh] kn: ಕನ್ನಡ [Kannada] ko: 한국어 [Korean] ku: Kurdî [Kurdish (Kurmanji)] ky: Кыргызча [Kirghiz] la: Latina [Latin] lb: Lëtzebuergesch [Luxembourgish] li: Limburgs [Limburgish] lmo: lumbaart [Lombard] lt: lietuvių [Lithuanian] lv: latviešu [Latvian] map-bms: Basa Banyumasan [Banyumasan] mg: Malagasy min: Baso Minangkabau [Minangkabau] mk: македонски [Macedonian] ml: മലയാളം [Malayalam] mn: монгол [Mongolian] mr: मराठी [Marathi] mrj: кырык мары [Hill Mari] ms: Bahasa Melayu [Malay] my: မြန်မာဘာသာ [Burmese] mzn: مازِرونی [Mazandarani] nah: Nāhuatl [Nahuatl] nap: Napulitano [Neapolitan] nds: Plattdüütsch [Low Saxon] ne: नेपाली [Nepali] new: नेपाल भाषा [Newar] nl: Nederlands [Dutch] nn: norsk nynorsk [Norwegian (Nynorsk)] no: norsk bokmål [Norwegian (Bokmål)] oc: occitan [Occitan] or: ଓଡ଼ିଆ [Oriya] os: Ирон [Ossetian] pa: ਪੰਜਾਬੀ [Eastern Punjabi] pl: polski [Polish] pms: Piemontèis [Piedmontese] pnb: پنجابی [Western Punjabi] pt: português [Portuguese] qu: Runa Simi [Quechua] ro: română [Romanian] ru: русский [Russian] sa: संस्कृतम् [Sanskrit] sah: саха тыла [Sakha] scn: sicilianu [Sicilian] sco: Scots sh: srpskohrvatski / српскохрватски [Serbo-Croatian] si: සිංහල [Sinhalese] simple: Simple English sk: slovenčina [Slovak] sl: slovenščina [Slovenian] sq: shqip [Albanian] sr: српски / srpski [Serbian] su: Basa Sunda [Sundanese] sv: svenska [Swedish] sw: Kiswahili [Swahili] ta: தமிழ் [Tamil] te: తెలుగు [Telugu] tg: тоҷикӣ [Tajik] th: ไทย [Thai] tl: Tagalog tr: Türkçe [Turkish] tt: татарча/tatarça [Tatar] uk: українська [Ukrainian] ur: اردو [Urdu] uz: oʻzbekcha/ўзбекча [Uzbek] vec: vèneto [Venetian] vi: Tiếng Việt [Vietnamese] vo: Volapük wa: walon [Walloon] war: Winaray [Waray] yi: ייִדיש [Yiddish] yo: Yorùbá [Yoruba] zh: 中文 [Chinese] zh-min-nan: Bân-lâm-gú [Min Nan] zh-yue: 粵語 [Cantonese]

jump to random article

searching for Subframe 326 found (494 total)

alternate case: subframe

Yamaha YZ250F (149 words) [view diff] exact match in snippet view article find links to article

engine and initially had a steel frame and subframe in 2001–2002. In 2003 it received an aluminum subframe, which was replaced in the 2006 model with

is 8 kHz with resolution 13 bit, frame length 160 samples (20 ms) and subframe length 40 samples (5 ms). GSM Half Rate is specified in ETSI EN 300 969

appropriate time. A Subframe is defined as the division of the Frame Structure at which Control Space and Data Space are interleaved. A Subframe is partitioned

divided into five 6-second subframes of ten 30-bit words each. Each subframe has the GPS time in 6-second increments. Subframe 1 contains the GPS date (week

time slots long to make a subframe of 32 time slots. The 32 time slots of each subframe are assigned as follows: Two subframes (A and B, normally used for

first motorcycle suspension systems, with a leading link front fork and a subframe suspended on springs from the main frame. Founded in 1902, the Bat Motor

engines and gearboxes mounted transversely on a subframe. Only straight 5 engines were offered. A front subframe and front MacPherson struts were used and either

independent suspension, meaning that the loading area is uncommonly low. The subframe and drivetrain of the Flavia were used, with some modifications to handle

compliantly mounted subframe. Above 42 Hz the compliantly mounted subframe is superior, but below that frequency the bolted in subframe is better. Semiactive

chassis. In place of the earlier car’s pressed steel subframe the W 153 had an x-shaped oval tube subframe. The car had been developed by Hans Gustav Röhr

other bikes do not use a single frame, but instead have a front and a rear subframe attached to the engine. In the early days, motorcycles were little more

miles on a single tank. Other notable qualities included its strong rear subframe, 23-litre tank and effective fairing. At the EICMA 2016 the concept bike

causing the subframe to become loose. Although tales of subframes dropping out of vehicles were simply not true, a vehicle with a loose subframe would fail

bike's controlled-fill (cast) aluminum alloy main frame has a steel tube subframe and 41 mm fork tubes, and rear suspension with two long-travel coil-over

DIR frames to McASP using the I2S protocol (one time slot for each DIR subframe) The transmit and receive sections may each be individually programmed

transaxle transmission lifted from the Chrysler LHS mounted to the rear subframe. Power is sent from the engine to the transaxle through a long torque tube

Pinto, the Mustang II employed an exclusive subframe, isolating its front suspension and engine mount subframe. The steering used a rack-and-pinion design

front suspension arms (wishbone) are attached to a pressed-steel welded subframe, which is directly bolted onto the bodyshell. The design is made to accommodate

cylinder configuration producing 500 bhp (370 kW) at 4,800rpm. A front subframe mounted to the engine carries the steering and suspension, with the front

tubular steel, like that of the R1200S, but the latter's tubular rear subframe is discarded in favour of a lightweight self-supporting carbon fibre semi-monococque

front subframe members are connected with a dash panel crossmember and a strong, front steel crossmember to help create a rigid, boxed front subframe area

problem involves rusting of the subframe. Most of the corrosion occurs on the passenger side of the subframe. If the subframe collapses while driving, the

SV650, including all bodywork (front fairing, fuel tank and rear plastics/subframe), but the main frame, handlebars, swingarm and forks are different. The

mounted to chassis of a particular car, the Station Sedan used a steel subframe and steel passenger doors onto which hard wood panels were mounted. The

fibre semi-monocoque is attached to a steel subframe at the front of the chassis, and an aluminium subframe at the rear. The engine, transmission, and

passenger's side of the vehicle. The idler arm bolts to the vehicle's frame or subframe. Generally, an idler arm is attached between the opposite side of the center

beam frame, the rear of the seat unit slopes forwards, and the seat unit subframe is totally separate from the main chassis of the bike. The NC23 & NC29

with no chassis, using the Mini engine/gearbox and front subframe but replacing the rear subframe with a beam on which the trailing arms were hinged. In

the standard fitment. The engines of these early cars were carried in a subframe bolted to the relatively slender ladder chassis. The SA usually carried

the road. However, due to a technical infringement involving the front subframe of Meeke's car, Meeke was excluded giving the rally win to Wilks. This

P61 was not a true monocoque, a rear subframe was bolted to the front, monocoque half of the car. The subframe housed BRM's type 56 engine, a 1.5 litre

The car was based on two front Rover Metro subframes, with the steering being locked on the rear subframe, these were fitted to a fibreglass monocoque

between subframes of a complex frame. For example, within the Cycle_of_life_and_death frame, the subframe Death is preceded by the subframe Being_born

and teardrop shaped mirrors. Porsche engineered a new light-alloy rear subframe with an entirely new multi-link coil springs and wishbone rear suspension

(like the rearsets and radiator). The subframe is also angled up higher than 2004+ models. The different subframe has year-specific parts, such as the

by Yamaha to their Passola moped, using the main frame components as a subframe for attaching to the body of the car. Brakes were converted to hydraulic

based on two front mini subframes attached to a central fibreglass monocoque, with the steering being locked on the rear subframe. The hard top roof was

by Yamaha to their Passola moped, using the main frame components as a subframe for attaching to the body of the car. Brakes were converted to hydraulic

was mounted on a simple box-girder carriage, which was carried on two subframes which were in turn mounted on double bogies. The barrel was mounted in

at the back. The bulkhead supported a tubular steel subframe and acted as the firewall. The subframe supported the engine and the rear suspension. The engine

fit. This involved fitting a new front subframe design, with a larger diameter horizontal chamber in the subframe. MGF was the last vehicle platform to

previous years rear subframe issues along with changing competition trends, 2005 was first year to utilize an aluminum plate rear subframe created via water

with coil springs and hydraulic shock-absorbers mounted to a unitized subframe.: 25  An anti-roll bar was fitted at the front. The rear suspension was

by astronauts of the Apollo–Soyuz Test Project 1978 panoramic camera subframe Brazil portal Geology portal "Riachão Ring". Earth Impact Database. Planetary

running gear was based on the Mini, with a Mini engine, transmission, front subframe and Hydragas suspension. The Scout, a particularly unsuccessful Mini based

inspired by the Ferrari Dino. The design is composed of two Mini front subframes, with traditional Mini rubber cone suspension, linked by a sheet steel

Enterprise Rupes Oblique MESSENGER WAC subframe Feature type Rupes Coordinates 36°32′S 283°28′W / 36.54°S 283.46°W / -36.54; -283.46 Eponym USS Enterprise

although refined slightly, for example by the inclusion of a separate subframe for mounting the front control arms to help noise isolation, as well as

speed and lateral acceleration, which then steers the rear suspension subframe and semi-trailing arms. The passive HICAS was fitted initially to regular

of several pressed and cast aluminum sections welded together. The rear subframe is made of welded square tube aluminum sections. The double sided aluminum

unibody structure was complemented by a front tubular subframe supporting the drivetrain and a rear subframe supporting the suspension links and the differential

of several pressed and cast aluminum sections welded together. The rear subframe is made of welded square tube steel sections, providing enough strength

This would include the evaporator and any associated drives/controls/subframe that are directly involved with making and ejecting the ice into storage

a signal consisting of a valid DS3 frame with the overhead bits (the M-subframe alignment bits, M-frame alignment bits, and P bits) with the payload set

opted to install the drivetrain in the pickup bed, within a welded steel subframe.[citation needed] Parts deemed unnecessary were removed from the body,

Meisterklasse. The self-supporting body was again supported by a U-profile plywood subframe. Available body types were a 2 door 4 seater ”limousine” (saloon) and a

"salt belt" states in the US. Subframe rust can result in the lower control arm mount breaking or detaching from the subframe, resulting in a loss of steering

Keihin FCR flatslide carburetors, a lower screen, a non removable rear subframe and a single seat. The primary drive, gear box and final drive ratios are

decimal) (some manufacturers encode the subframe value differently at different frame rates to indicate subframe 0) Both forward and backward shuttling

what was, for the early 1960s, a novel design principle, with a front subframe carrying the engine, front suspension and front bodywork bolted directly

which had a squarer body and stronger chassis, not using the mini rear subframe. In 1987 Scamp manufacturing and ownership was taken over by Scamp enthusiast

specifications Chassis Fiberglass bodywork, aluminum monocoque or tubular rear subframe Suspension (front) Double wishbones, coil springs over shock absorbers

Successor 59 Technical specifications Chassis Aluminium monocoque with rear subframe Suspension (front) Lower wishbones, top rockers actuating in-board coil

launch the W21 differed from its predecessor most notably on account of its subframe and swing rear axle, supported by lateral leaf springing, adopting a pattern

the time difference between the start of a DL subframe and the transmission of the corresponding UL subframe. From these the ESMLC estimates the UE position

for the driver. The engine and five-speed ZF transaxle were mounted on a subframe attached to the floor pan via four flexible mounts, which also helped the

unibody construction technology using a separable elastomer isolated front subframe assembly, a design which first appeared in GM vehicles on the 1st generation

including the 911 RSR, 911 GT3 R, and 718 Cayman GT4, along with a custom rear subframe. In 2021, Porsche announced the Mission R would be featured in a virtual

engine and chassis wiring harnesses and minimal bolts attaching the rear subframe, tail lights, and headlight. The R nineT version of the bike has upside-down

As a special feature, the locomotive had been fitted with a two axle subframe supporting the brake frame for the electromagnetic rail brakes, which were

specifications Chassis Fiberglass bodywork, aluminum monocoque or tubular rear subframe Suspension (front) Double wishbones, coil springs over shock absorbers

severe service and needs heavy-duty trucks. A Roll-off has a hoist and subframe, but no body, it carries removable containers. The container is loaded

Honda Civic. By cutting off the roof and side panels and adding a steel subframe and fibreglass body, it allowed a quite easy conversion of a Honda Civic

Lola T280 Technical specifications Chassis Aluminum monocoque with rear subframe, fiberglass body Suspension (front) Double wishbones, coil springs over

payload is padded using JK sync symbols. Sync symbols may be inserted at any subframe boundary, and must occur at least once per frame. Though the standard disassociates

version. The bike has a steel trellis frame with a cast aluminium seat subframe. The suspension uses high-end inverted forks and an alloy, double-sided

frame itself, motor mounts and cases subcages focus on protecting the subframe of the motorcycle. In certain cases, subcage applications will also eliminate

in that it features extra head shields below the seat covering the rear subframe. The 1200 also like the 750 did not receive traction control or ABS in

covering the brake pedal) be utilized. A 12 bar can also be added to the subframe which is designed to prevent a bike from flipping. All-terrain vehicle

BT53 Technical specifications Chassis Carbon fibre monocoque with rear subframe Suspension (front) Double wishbones, push-rod operated coil springs over

completely new, but with the same bore and stroke as before. 2008–2010 New subframe, bodywork, and fuel tank. Introduction of new Suzuki Drive Mode Selector

track of the Mark X and 50" track of the E-Type. The S-Type used the same subframe mounted, coil sprung, twin wishbone front suspension as the Mark 2. Lyons

suspension with a distinctively curved tube axle that clears the rear subframe to provide 50mm (2 inches) of wheel travel. Benefits include simplicity

housing the transmission and drive chain, while the engine was mounted in a subframe below. The flat-twin engine was designed by Franzenburg and manufactured

engine (made by White and Poppe) and transmission mounted on a separate subframe from the main body. A year later they revealed their new 2-ton model, this

bodyshell identical to the Fairlane wagon's). One notable change was the front subframe assembly — as compared with Ford, Chrysler and AMC, in whose cars the entire

available naked FZ6N option). The FZ6 in 2006 has a revised engine, frame, subframe, grabhandle, rear swingarm and wheels are painted in black. It had a metal

thicker anti-roll bars, stronger semi-trailing arms and a reinforced subframe. When the M roadster switched to the S54 engine (2/01 production), the

Construction is primarily a semi-monocoque of carbon fibre composite over a steel subframe. Over 20 programmable servo motors are used to perform the transition between

specific to the Cronos, like the bonnet, front crosspieces, front and rear subframe, bumper, rear axle and skeleton of the body. During the design phase, the

reinforced plastic panels bodywork, aluminum monocoque (later with rear subframe) Suspension (front) Double wishbones, coil springs over shock absorbers

thicker anti-roll bars, stronger semi-trailing arms and a reinforced subframe. When the M roadster switched to the S54 engine (2/01 production), the

designed, now using only Ford Escort mechanicals with Ford Cortina front subframe "Locust Hornet" - Later just called the Hornet, same construction as the

Four-Twelve was carbon-fiber and aluminum honeycomb. It used a 4130 steel rear subframe and aluminum castings. The body was lightweight carbon fiber. The low profile

On August 28, 1967, the Manaus Free Trade Zone Authority, SUBFRAME, was created. SUBFRAME is an independent body with its own legal status and assets

specifications Chassis Fiberglass aluminum monocoque with steel tubular rear subframe Suspension (front) Double wishbones, coil springs over dampers, anti-roll

retains the carbon-fibre monocoque chassis with aluminium front and rear subframe from the Aventador along with the pushrod suspension system. The interior

FCR Flatslide carburettors with TPS, adjustable camshafts, lighter rear subframe combined with single seat unit, front suspension with compression & rebound

Track: 1:19.8 Notable technology includes a pure carbon fibre monocoque and subframe produced by ATR Composites Group of Italy, dry sump lubrication and inboard

manufacturers. From 1900 Motosacoche produced a bicycle auxiliary engine in a subframe that could be installed into a conventional bicycle. The details of the

specifications Chassis Fiberglass aluminum monocoque with steel tubular rear subframe Suspension (front) Double wishbones, Coil springs over Dampers, Anti-roll

are then "minor frames" within that superframe. Each frame contains a subframe ID (often a simple counter) which identifies its position within the superframe

from the firewall to the subframe holding the engine and front suspension. The design change was intended to prevent subframe movement from affecting steering

Formula 1 single-seaters, while in the two-liter there was an additional subframe on which the suspensions were mounted, given the lower structural rigidity

specifications Chassis Fiberglass aluminum monocoque with steel tubular rear subframe Suspension (front) Double wishbones, Coil springs over Dampers, Anti-roll

bend. To save weight, the motorcycle has a unique cast magnesium alloy subframe to which the front fairing is secured. The K1600 was redesigned for the

and front brakes, new rear shock, a new aluminum fuel tank, magnesium subframe, ABS brakes, riding modes, and traction control. The new aerodynamics are

specifications Chassis Fiberglass aluminum monocoque with steel tubular rear subframe Suspension (front) Double wishbones, Coil springs over Dampers, Anti-roll

of a 1500-bit-long frame made up of five subframes, each subframe being 300 bits (6 seconds) long. Subframes 4 and 5 are subcommutated 25 times each,

Berlinetta consists of a carbon fibre monocoque mated to an aluminium subframe at the front and rear. The body is entirely made of carbon fibre and takes

standard GT. Factory upgrades included a lowered suspension (3/4 inch), subframe connectors (used on the convertible models), Tokico shocks, and brakes

in that its engine could be removed without a lift. It is mounted on a subframe (which also holds the intercoolers and the radiator) which can be slipped

further forward, making for a much more upright riding position. The rear subframe is bigger and more robust and incorporates factory supports for lateral

formula}}{\big \}}.} The fundamental truth-preserving operations of generated subframes, p-morphic images, and disjoint unions of Kripke frames have analogues

CS8 15-cwt GS truck. It included a new four-cylinder engine mounted on a subframe and not directly onto the chassis. Like the Guy, the body had a very characteristic

first, but was disqualified in post-event scrutineering after the front subframe was found to be overweight. Alexandre Coria finished the rally in first

specifications Chassis Fiberglass aluminum monocoque with steel tubular rear subframe Suspension (front) Double wishbones, coil springs over dampers, anti-roll

2013. Retrieved 20 November 2013. The Gold Wing F6C has a new aluminium subframe, new styling and steering geometry and radiators mounted on the sides instead

Falcon in 1960. The main change from the XM was the 'torque box' steel subframe which added structural rigidity to the car. This was a key in improving

its frontal chassis is based on the 993-generation 911, while the rear subframe was derived from the 962C Group C prototype along with its water-cooled

labour-intensive; the only way to remove the engine without dropping the suspension subframe was to crane the engine out through the passenger door. A 1974 road test

A monocoque made of carbon fiber reinforced plastic with a screwed-on subframe made of tubular steel and light metal serves as the basis, while the body

rear bodywork was unstressed and only supported by light subframes. The front bodywork and subframe was designed to deform and absorb energy during a crash

Jyväskylä. The first tractors actually used parts of cannon barrel for their subframes. The first tractor model was the Valmet 15, the model number indicating

damper, forged aluminum wheels, carbon fibre front mudguard and a shorter subframe for one person use only (no passenger seat). The SP stands for Sport Production

introduced the LCR, a double-action only, six-shot revolver with a polymer subframe, as well as the later LCRx. In early 2017, Henry Repeating Arms announced

suspension and steering, a new dashboard and a modified under bonnet and subframe layout to allow the new generation of XU series engines with 5-speed gearbox

and anti roll bar; at the rear, trailing arms mounted on an auxiliary subframe, coil springs and an anti roll bar. 1998 saw the release of the Limited

radio D-STAR US 6199037, John C. Hardwick, "Joint quantization of speech subframe voicing metrics and fundamental frequencies", issued 6 March 2001, assigned

Star kit was based on a purpose-built two-seater chassis using the front subframe and the rear axle from a donor Vauxhall Viva. The car was most often powered

relatively unusual at the time. Striking features included the outside subframe and the streamlined shape of the driver's cab and smokebox, resembling

glass-reinforced plastic for the entire load-bearing structure of the car. A steel subframe for supporting the engine and front suspension was bonded into the front

specifications Chassis Fiberglass aluminum monocoque with steel tubular rear subframe Suspension (front) Double wishbones, Coil springs over Dampers, Anti-roll

GT3 counterpart, the 296 GT3. However, instead of being mounted to the subframe as in the road-going vehicle, the engine is a fully stressed member in

multi-plate slipper clutch Frame type Steel trellis. Cast aluminium rear subframe Suspension Aluminium single-sided swingarm Brakes Front: 2 × 320 mm semi-floating

0–60 mph (0–97 km/h) time was clocked at 9.5 seconds. The Toronado used a subframe that ended at the forward end of the rear suspension leaf springs, serving

featuring enlarged front and rear anti-roll bars, adjustable dampers, modified subframe for increased camber and castor, cast magnesium wheels and racing brake

with fully independent strut type front suspension mounted on a separate subframe and a leaf spring rear axle. Nissan NV200 Vanette Van VX (Japan) Nissan

and reduced drag. To the front bulkhead was attached an aluminium tubing subframe for the engine, steering assembly, and front suspension. Rear suspension

conventional rear subframe of metal tubing. Instead, the rear-mounted, moulded polyethylene fuel tank has a double role as the rear subframe, carrying the

suspension by having the dampers upper mount contained within the rear swingarm subframe, rather than connecting it to the frame itself. Bicycle suspension Suspension

and the number of columns is variable according to how many slots per Subframe are occupied. The RS Frame is then partitioned into several segments of

designated as the M-body for RWD models or L-body for AWD models) had a bolt-on subframe. For the M-van, the front suspension shared most components with the GM

high-performance 5.0 L Coyote V-8 in the base GT V8, but borrowing front and rear subframes from the Shelby GT350 and various parts from it and the Shelby GT 500

high-performance 5.0 L Coyote V-8 in the base GT V8, but borrowing front and rear subframes from the Shelby GT350 and various parts from it and the Shelby GT 500

motorcycle and the sidecar, or on the sidecar platform. Over time the subframe, struts, clamps, sidecar frame, etc. would merge with the motorcycle mainframe

The reason for this was that the transmission, rear suspension, and rear subframe were built as one unit. The car had numerous quick-connect hoses and easily

frame, below the rear cylinder. The rear wheel was rigidly mounted to a subframe bolted to the frame. The front suspension was initially a pivoting fork

retain parabolic shape in reflectors is another advantage, and normally the subframe requirements are reduced by more than 300%. The top surface reflection

during the run, passenger footpegs were moved to loops off of the rear subframe and a lock was added to the fuel filler cap. : 42  1978: F2 Virtually the

horizontally under the engine. The seat and rear fender were supported on a subframe bolted to the main frame. The Scat was a dual-purpose motorcycle based

specifications Chassis Fiberglass aluminium monocoque with steel tubular rear subframe Suspension (front) Double wishbones, Coil springs over Dampers, Anti-roll

zero errors. The DS-3 M-frame uses P bits to check the line parity. The M-subframe uses C bits in a format called C-bit parity, which copies the result of

rejected Coupe DeVille concept. Unibody construction included a bolt-on subframe with a rear suspension based on the rear-wheel drive 1968–74 X-body platform

Camaro was similar to its predecessor. It had a unibody structure, a front subframe, an A-arm front suspension, and leaf springs suspending a solid rear axle

fitted to the XF and F-Type models, and the rear features an entirely new subframe mounted multi-link suspension system, named by Jaguar as Integral Link

Netherlands, various parts are added to the car, most notably the rear subframe with the drive train as well as the battery pack. Motor Coach Industries

it to the Ford six-cylinder industrial engine with a special cast iron subframe for added strength. Ford **10 series 2810, 2910, 3610, 3910, 4110, 4610

with built-in fog-lamps, a rear spoiler, a brace located near the rear subframe, and R badging on the boot lid and both front fenders (wings). The Jaguar

improved through changes to frame and suspension. A new cast magnesium subframe was designed for the 2009 R1, resulting in lower weight and aiding mass

Technical specifications Chassis Aluminium semi-monocoque with rear tubular subframe Suspension (front) Double wishbones, coil springs Suspension (rear) Double

include adapter plates for the transmission, K member, engine mounts, front subframe, and more, depending on what ss required for the particular swap. Some

noticeable was new full fairing panels, new sidepanels and a redesigned rear subframe that had integrated number plate/rear light. The front indicators were

assisted optional All wheel steering "Super-Hicas" Body Steel monocoque, with subframe Track front/rear 1540/1555mm Wheelbase 2900 mm Length x breadth x height

springs, telescopic dampers, and an anti-roll bar, all carried in a separate subframe mounted to the body by rubber bushes (with only minor revisions, this system

cast wheels (16" front and 18" rear), an aluminum frame with steel rear subframe, and a conventional dual-sided aluminum swing arm with single shock. The

rear shock absorber with the upper mount connected to the rear swingarm subframe to help isolate undesirable forces transmitted to the steering head. It

year. An exception was a response to the problem of the aluminum rear subframe on 1999 and 2000 models breaking when the bike may have been overloaded

the Mark VII KTT) were adapted with a swinging-fork rear end and bolt-on subframe for the seat. The experimental first swinging-arms used an adapted steering

and the brakes are vented discs at the front and solid at the rear. A subframe carries the powertrain and front suspension. The styling was developed

D7 Bantam Super 175 cc 1959 1966 Swinging-arm frame with separate rear subframe bolted on D10 Silver Bantam, Bantam Supreme, Bantam Sports and Bushman

for the left and right rear wheels in a compactly packaged and sturdy subframe, but it also included inboard disc brakes, reducing the unsprung weight

on a truck bed would reduce overall material costs. After designing a subframe and a rear anchoring platform to filter and dissipate the gun's recoil

to its frame's center crossbar. Face-to-face tandem benches include a subframe with integrated handles and foot pegs. Face-to-face tandem swings are known

frames of 1 ms each. For non-Multimedia Broadcast Multicast Service (MBMS) subframes, the OFDMA sub-carrier spacing in the frequency domain is 15 kHz. Twelve

frames of 1 ms each. For non-Multimedia Broadcast Multicast Service (MBMS) subframes, the OFDMA sub-carrier spacing in the frequency domain is 15 kHz. Twelve

1948 and 1952, it was upgraded with new road wheels, turret race, engine subframe mount, main clutch, oil pump, and radio increasing weight to 48.5 t (47

1996-2004 model XR250R but with different suspension, fuel tank, rear subframe, electrical system, carburettor, cam shaft and most significantly the addition

monotube shocks. Both the front and rear suspensions feature an isolated subframe and stabilizer bar. Four-wheel anti-lock disc brakes are standard in all

rear suspension is a 5-link Multi-link suspension, with fabricated steel subframe, fabricated steel control arms, and cast iron carrier. This design is designated

electrical equipment was by General Electric. The main frame rested on two subframe bolsters which were articulated together; the four two-axle trucks were

Frame type Chromium-Molybdenum trellis frame, powder-coated with Aluminium subframe Suspension Front: WP USD 48 mm (1.9 in) diameter, 210 mm (8.3 in) travel

Chevrolet Camaro built for autocross with modifications including upgraded suspension and subframe, a 600hp 427ci LS engine and a carbon fiber front end.

weight, the car uses an unpainted carbon fibre skin over a magnesium-alloy subframe. Individual components have been designed to be low weight, including engine

lightweight materials helped reduce weight. The 370Z features a front aluminum subframe, aluminum-alloy engine cradle, aluminum door panels, an all-aluminum hood

differential, electric steering, additional bolted joints between the axle subframe and the body sills, aluminium stiffening plate and a five-link rear suspension

Beetle (Type 1), the Type 3 engine and transmission unit was mounted into a subframe (which contained the complete rear suspension), which was then rubber-mounted

fitted to the XF and F-Type models, the rear features an entirely new subframe mounted multi-link suspension system, marketed as Integral Link. The system

RON 98 fuel and 600 N⋅m (443 lb⋅ft) of torque at 3,000 rpm. The front subframe along with the strut brace were modified in order to accommodate the powerful

wheels, the ladder chassis was cut down at the front, with a Mini front subframe welded in place. The moulds were also changed to have two large arches

carry any oil, and so a separate tank was added. A change of the rear subframe brought a new seat support, which freed the passenger footpegs from the

LEV III SULEV30 compared with the non-hybrid's ULEV-2 ranking. The front subframe was made from aluminum. Front suspension used a double wishbone layout

Quattroporte, uses a steel monocoque chassis with additional subframes with the front subframe made of aluminium. Tested weight distribution for the diesel

example held by the London Motorcycle Museum), in the absence of the usual subframe footrest brackets (omitted to accommodate the new style muffler/silencer)

steel platform structure. A front subframe carried the engine and transmission, while in the rear another subframe carried the differential.: 65  The

supercharger impeller were also redesigned. A new larger fuel tank, rear trellis subframe and panniers increase the bike's weight by 19 pounds (8.6 kg). For 2019

109E. The engine and front suspension were mounted on a tubular steel subframe bonded to the body shell and roll over protection was provided by a steel

in the process, the bodies are 'married' to a sub-assembled engine and subframe. Completed vehicles are sent down a Final Line, where all aspects of the

engine casings, lighter crankshaft, flywheel and alternator, but the rear subframe has also been redesigned and both bikes carry some carbon fibre. The Evo

transmission, radiator and front suspension were all supported by an additional subframe. Light van designs placing the driver and the engine together at the front

The body was based on a self-supporting timber frame with a “U-profile” subframe. All four wheels were attached via independent suspension. The most frequently

improve stability by reducing toe-in changes under cornering loads. The subframe also received a revision in design to achieve high rigidity. In the gearbox

The vehicle features an aluminium front beam-absorber, size of the front subframe, laser welding of the roof, and an extensive use of VHSS and UHSS panels

rails. By not having the engine bearing on the sub frame, the stiffened subframe could address suspension requirements. Front suspension travel was increased

suspension instead of the Hydrolastic system which required a revised front subframe, and all models now feature electric windscreen washers. The HL loses its

transmission, oil-filter adapter, engine oil cooler, and front and rear subframe. The Mach 1 also utilizes parts from the GT500, including the rear axle

was also increased with 25 mm subframe spacers; and overall frame stiffness increased with reinforced welds on the subframe mounts and A, B, and C pillars

numerous engine, chassis and bodywork changes. The 2001 US F4i had a new subframe which raises the seat by 5 mm (0.2 in) that allows for more under-seat

is the most common case, and corresponds to Dolby Digital; the shorter subframe lengths are intended for use in interactive applications like video games

from Ford, a change which required an extensive redesign of the car's subframe.: 89  With a single two-barrel carburetor this later engine produces 175 hp

Supercar tires with a compound formulated specially for the 1LE. The rubber subframe bushings are also replaced with solid aluminum counterparts to increase

"F41" suspension, used front MacPherson struts which were mounted to a subframe, lower control arms, coil springs and a stabilizer bar, while a torsion-beam

Platform Fibreglass body over aluminium honeycomb monocoque with steel subframe and steel rollover bars Related Ford Mustang (fourth generation) Ford Fiesta

having 30% stiffer rebound than the original and having a modified rear subframe arrangement with wishbones and radius arms relocated to provide greater

having 30% stiffer rebound than the original and having a modified rear subframe arrangement with wishbones and radius arms relocated to provide greater

Platform Fibreglass body over aluminium honeycomb monocoque with steel subframe and steel rollover bars Related Ford Mustang (fourth generation) Ford Fiesta

wheels, inboard at rear Body/Chassis Monocoque bodyshell with bolted front subframe, five-seater saloon, front engine, rear-wheel drive Tyres/Wheels 6.40 ×

and engineered much like its predecessor: a unibody utilizing a front subframe, A-arm and coil spring front suspension, and rear leaf springs. The chassis

found on the 335i Sport are used throughout the B3 versions. The rear subframe bushings are the same as those found on the 335d while the secondary springs

bike that's been converted into an entry-level road racer. The frame, subframe, swing arm, motor and transmission are all stock, but the wheels, tires

"UNIVIS." The body consisted of a square tubular structure bolted to the subframe with 10 rubber mounts (Silentbloc). Pre-series cars (built before March

standard Golf, and has a stiffer suspension incorporating an aluminium front subframe. The all-wheel-drive system has been updated and benefits from a torque-vectoring

The new layout saw the engine and transmission mounted on a removable subframe; the assembly removed from the underside of the vehicle for maintenance

"B" bodies and model year 1973–74 Mercurys. The unibody structure with subframe for engine/transmission was retained along with other typical Chrysler

lightweight, thanks to the use of carbon fiber. The body also features a subframe back at the rear for the engine. The R1R also uses inboard suspension both

for both the turn-key and kit car was provided by using a complete front subframe from a Chevrolet Corvair. The steering box and linkage were also from a

155R14 Michelin X radial tyres. The body-shell also had revised front subframe mountings. Distinguished by an enamelled "2C" badge on the radiator grille

decompression at CAM, and swingarm pivot through engine case. Removable rear subframe with hinged airbox door. Lighter and less plush seat. Longer Aluminum kickstart

although refined slightly, for example by the inclusion of a separate subframe for mounting the front control arms to help noise isolation, as well as

Orange Box" because of its colour) due to the addition of a modified front subframe, on which the engine was mounted, and by the engine being mounted with

being stuck in the garage for the duration of qualifying due to a damaged subframe.[citation needed] Q2 was interrupted by a red flag early on when Oriola

This wing was bolted through the rear quarter panels and into the rear subframe. Although proven less effective than shorter wing designs, the engineer

both the A and B pillars, floor crossmembers and rocker panels. The rear subframe is more rigid and has larger bushings for decreased NVH (noise, vibration

Australia, as well as the USA. The early Robin Hood S7 used the front subframe and mechanical components from any Dolomite, attached to a monocoque body

structure. The battery enclosure is directly connected to the front axle subframe, while the battery pack is bolted to the floor assembly with 22 bolts.

1985, #00001, the first DB1 was a DB1R prototype, unique aluminum rear subframe and right-side shift, raced by Davide Tardozzi. 1986, #00200, engine DM650L-612148

of much thinner material. The rear bumper lacked an internal supporting subframe and was simply fastened to the bodywork sheetmetal. Other weight-saving

lower bonnet; and the engine, gearbox, and suspension were carried on a subframe to allow the unibody to be relatively unstressed. The body was welded to

the first Falcon to offer IRS (a double wishbone design on an isolated subframe). IRS was made available as a costly option on the base Forte, Fairmont

brands. The Mark IV, launched in 1976, introduced a front rubber mounted subframe with single tower bolts and larger bushes in the rear frame. In addition

from the Clubsport to the Clubsport S include new front suspension and subframe components, updated suspension alignment, upgraded brakes, a more highly-strung

(6x2) Doors 2 or 3 Floor type High floor Chassis semi self-supporting with subframe Related Orion-Ikarus 286/Orion III Powertrain Engine Cummins 855 cu in

simplified 25-30 engine. The frame was made of very stiff section steel. A subframe was provided to make the engine clutch and gearbox one unit. By the standards

by the first A80 prototypes being hand-assembled in 1991. Again using subframe, suspension, and drivetrain assemblies from the Z30 Soarer (Lexus SC300/400)

has to be changed also. It is also worth while noting that the automatic subframe is not compatible with the manual gearbox and it is better to change the

handcrafted aluminium tank that resembles the tank of the 750S, a new rear subframe and seat, alloy mudguards and spoked Kineo wheels. A limited edition version

welded bodyshell with a fully integrated T45 roll cage with strengthened subframes. The chassis comes complete with a limited-slip differential, independent

were multiple lawsuits primarily due to unintended acceleration and weak subframe rigidity. The 2003 model year Corolla was also one among the many vehicles

The A-pillar and the chassis were reinforced with steel, and a steel subframe was added in the rear. PBB Design built three cars before the moulds were

windshield laid back for aerodynamics, all four fenders widened, the front subframe Z'ed (to physically move the front suspension higher and lower the front

models: the widest version of Jaguar's IRS unit from the Mark X, and the subframe-mounted independent front suspension first seen in the 1955 Mark 1, with

fitted to Interscopes's new Interscope IR01, which featured a tubular rear subframe, as the Porsche motor could not be used as a stressed member as the Cosworth

handle, leaving the rest of the now-redundant cocking mechanism inside the subframe. Overall, the M3A1 was seen by most soldiers and Ordnance technicians as

Pillion footrest mounts were changed from being integral to the rear subframe to bolt-on cast aluminium assemblies. Larger frame castings reduced the

Although officially only one car was completed, Isdera completed a second subframe before its closure which was bought by an enthusiast who also purchased

fitted to Interscopes's new Interscope IR01, which featured a tubular rear subframe, as the Porsche motor could not be used as a stressed member as the Cosworth

fibre at the mountings for extra strength. It used a classic Mini front subframe and A-series engine at the front. The rear was a galvanised beam axle used

engine/gearbox unit was used as a stressed member, with the forks and rear subframe (4 parallel tubes) bolt directly onto it. The trailing-link forks use double

the Granada, with trailing arms and coil springs mounted on a tubular subframe which also provided location for the final drive/differential housing driving

Syncro four-wheel-drive system from the MkII Golf Country using a custom subframe. Approximately 65 were built. In the late 1970s, the Mk1 Golf GTI was campaigned

angular Lario styled handlebar fairing was replaced by a more rounded sleek subframe mounted fairing with external indicators. A total of 2113 Le Mans MK V's

550, hence being distantly related to the Rover 75, sharing its front subframe. The five-door fastback/hatchback, known as the MG6 GT, went on sale in

progression of upgraded machine specification with a modifications to the rear subframe, suspension, seat arrangement and with a new hand-operated stand. Additional

custom propshafts. The Transit rear axle was retained, mounted to a rear subframe or 'lift cradle' to give the extra ride height. Other modifications were

with the later Mazda MX-5 Mk2 & Mk2.5/NB. The MX-5 itself has an unusual subframe that allows the body to be removed, leaving the engine, drivetrain and

to use steel subframes to carry the drivetrain and suspension for the front and rear. This also simplified production, as both subframes could be built

structural shear panel (which increases the lateral stiffness of the rear subframe by 30%) and air conditioning. The vehicle went on sale in September 2010

the most successful model. The vehicle is based on the Jaguar XJ 6. The subframe, axles and the six-cylinder engine are used by this vehicle. The customer

wishbone design is most appropriate when used as part of a rear triangle subframe on a bicycle with independent rear suspension. A dual seat stay refers

gears Frame type Open cradle, chrome-molybdenum steel tubes with Aluminium subframe Suspension Front: WP USD 4860 MXMA (damping and rebound adjustable) 48 mm

1200 models; the front frame cradle was identical to the 600, the rear subframe was identical to the 1200 with bolt on pillion footpeg hangers, the clocks

chassis, like the CAT06e, consists of a fibre monocoque with a tubular steel subframe. The team participated in three events during the season: Germany, Spain

both axles. The differential and rear suspension arms were supported by a subframe. The Maserati Biturbo was the first production car to use a twin-turbocharged

double lower arms, coil springs and anti-roll bar secured to a light alloy subframe which is, in turn, mounted onto the car's body. The design of this geometry

consists of a carbon body on a tubular frame chassis with a reinforced subframe and reinforced shock absorbers and suspension with double wishbones. It

be interesting, but the plot is poor, it lacks strength, it has a love subframe and it sins of a scarce psychological treatment that focuses more on superfluous

Strength Steel (35 percent) or High Strength Steel (31 percent). The front subframe uses four bushings (the first generation has none) and the shock absorbers

and coil sprung MacPherson struts, attached to a thick pressed steel subframe at the front. The engine range available at launch included 1.2 L and 1

changed during model year requiring shorter torque tube and different rear subframe. "S" brakes installed during model year except North America. 1981 Model

balanced upon a large rear mono shock hidden between the swingarm and subframe under the battery complementary to two smooth front forks. It has two large

specification models, in addition to the existing 1.1L version. A new subframe for mounting the powertrain was introduced to combat earlier criticisms

It is possible to have different DA and SA parameter values in A-MSDU subframe headers of the same A-MSDU, as long as they all map to the same Address

subcontracted to various suppliers. The drivetrain was mounted on a separate subframe, meaning it can be removed in as little as two hours. It was also moved

timing gears, and addition of bottom end of reinforcement with a stiffening subframe to cope with increased power output to 460 hp (340 kW). The gearboxes were

at Hammerer Aluminium Industries in Austria.[citation needed] The front subframe of the 2013 Honda Accord was friction stir welded to join aluminum and

the GT-15, which had a custom-built chassis that used a Corvair front subframe and suspension as well as the Corvair's rear suspension, engine and transaxle

tyres, retuned speed-sensitive Servotronic system, solid-mounted front subframe and stiffer rear bushings; 'Dynamic' mode for the Bosch 8.1 ESP system

6,600 rpm Frame type CroMoly Tubular Steel, Engine as Stressed Member, Subframe: CroMoly Steel Trellis Wheelbase 1,509 mm (59.4 in) Seat height 850 mm

five-speed gearbox. Traditionally light MV frame was reinforced with a lower subframe, becoming closed. 19-inch wheels got offroad tyres. This motorcycle became

about a half-dozen of its original spandrel panels. The deteriorated steel subframe and rusted mullions and caps were replaced. New panes of 1⁄4-inch-thick

(in-house built) hybrid composite monocoque chassis, with a removable subframe, 10” wheels to minimize unsprung mass and inertia, and a 4-cylinder Yamaha

torsion bars longer than all other Chrysler products and a rubber-isolated subframe crossmember containing the torsion bar anchors, as well as full instrumentation

of high-tensile steels in its body structure, while undercovers for the subframe, engine compartment, and cabin floors results in an improvement of the

C-body unibody platform that featured a bolt-on, rubber-isolated front subframe. Elwood Engel designed the 1965 New Yorker (and all Chrysler models) with

Automated Load Handling System (ALHS) and Universal Torsion-Resistant Subframe (UTRS) will further enhance capability in the traditional logistics role

directly mounted to the engine and gearbox themselves, rather than a chassis subframe. The only exceptions were the suspension radius arms, which transmitted

Although with a wooden chassis, the front suspension was mounted in a steel subframe. The first 33 Marcos (some say the first 52) have a de Dion rear suspension;

original on 18 September 2018. Retrieved 19 September 2018. "BUILD 7128 – SUBFRAME AND SUSPENSION" (Press release). Koenigsegg Automotive. 13 December 2016

all suspension links and the rear differential isolated from the rear subframe with large rubber mounts to minimize noise and vibration intruding into

canards, removable bonnet duct, and swan-neck rear wing, as well as the rear subframe from the race car and extra bracing. This special edition receives various

exhaust and torque tube, lightweight lithium-ion battery, 3D printed rear subframe and stripped-back steering wheel. The handling is also reworked by the

were built on a custom chassis some used part of the Panhard Dyna Junior subframe along with the engine and transaxle.: 61  Coach-builder Ghia-Aigle of Lugano

also at the automotive SPE conference in April 2021. Finally, the rear subframe of the Ducati Hypermotard, which was developed in 2017-2019, was designed

seating. Production quantity: 313 The engine was carried in a separate subframe on the ladder type chassis with semi-elliptic leaf springs, a live rear

all suspension links and the rear differential isolated from the rear subframe with large rubber mounts to minimize noise and vibration intruding into

the Husqvarna TC300 (essentially a KTM XC with different plastics and subframe) and the TE300 come with linkage rear suspension. For the 2020 model year

from the model K and the BSA A7. Also the K2 chassis has a different rear subframe, fuel tank and side panels. These changes gave the K2 a typically conservative

Giga Press machines, reduce mold design costs, and incorporate hollow subframes. Key innovations include using 3D printing to make cast prototypes with

roll-over bar. Some reviews of the car call the central tub a monocoque. Subframes were fitted at the front and rear. Bodywork was of glass-reinforced plastic

percent increase in torsional rigidity; mainly due to revisions in front subframe design. The suspension retained its basic MacPherson strut in the front

conventional trailer. Transversal frame beams and some other chassis parts, rims, subframe, wings, crane beam, protection wall behind the cabin and the vertical side

perimeter frame with a welded floor and attachment points for the front subframe and rear suspension. Power once again came from Panhard's air-cooled flat

fitted with workshop or command & control superstructures. In addition, a subframe can be installed to transfer existing 8-feet containers from the MB290GD

the Pacer's "smooth and quiet ride can probably be attributed to a front subframe that isolates the passenger capsule from the engine, suspension and steering

center, and support octagonal subframes at the far end of each arm. Eight parachute guidelines were suspended from each subframe, which helped keep the parachute

times engine tuner. Surtees asked Exactweld to create the front and rear subframes for the bike. Exactweld partners Guy Pearson and John Baldwin had previously

retails at $41,900 with three color options available. The MOKE has a front subframe and other mechanical items such as the front strut suspension and transmission

Downton-tuned Mini engines and their transaxles in a minimal chassis with a Mini subframe in the front and a Deep-Sanderson cross-member and suspension in the back

body components. These included connectors between the front and rear subframes. The rear end used fore-and-aft staggered rear shock absorbers to eliminate

to dampen engine vibration. The engine and separate gearbox were on a subframe. The engine was flexibly held by two sets of enclosed springs at the front

Triumph Vitesse front suspension with modified chassis rails, shortened XJ subframe, and sway bar. Rusted metal front wings and bonnet replaced with one-piece

unibody chassis of the Volkswagen Golf Mk1 Cabriolet. Biagini added a custom subframe that allowed it to accept the Syncro all-wheel drive powertrain from the

centre frame with boiler, firebox and cab, which sat on two subframes at each end. Each subframe, like a Mallett locomotive, contained a fixed set of driving

uses a fully aluminium suspension components mounted to a cast aluminium subframe. It has dual-wishbone independent front suspension and H-arm multi-link

operated hydraulically Frame: Tubular chromoly space frame, powder-coated Subframe: Aluminium 7020 Handlebar: Aluminium, conified[check spelling] Front brake:

for its era, the engine, gearbox and transfer case were assembled on a subframe which was then carried on the chassis by a three-point suspension. This