Find link

language:

jump to random article

Find link is a tool written by Edward Betts.

searching for Pony truck 63 found (97 total)

alternate case: pony truck

1Co+Co1 (783 words) [view diff] exact match in snippet view article find links to article

per axle and with the fourth non-powered axle in an integral leading pony truck to reduce the axle load. The similar 1Co-Co1 classification is in the
TDLR 5 (654 words) [view diff] exact match in snippet view article find links to article
they were looking for a locomotive more suited to passenger work, the pony truck should give a better ride for the crews over lightly laid track, perhaps
South African Class 8X 2-8-0 (1,319 words) [view diff] exact match in snippet view article find links to article
the leading pony truck. In the designs of all but two of the subsequent orders for more 8th Class locomotives, the two-wheeled pony truck was replaced
GWR 5205 Class (385 words) [view diff] exact match in snippet view article find links to article
used as part of the 4709 project. The Standard No. 4 Boiler, pony truck wheel set, 2 pony truck axleboxes, 4 horn guides and 2 eccentric sheaves are being
South African Class 8F 4-8-0 (913 words) [view diff] exact match in snippet view article find links to article
leading two-wheeled pony truck. When designs were prepared at Salt River for a later order for more locomotives, the pony truck was replaced with a four-wheeled
South African Class 8E 4-8-0 (1,086 words) [view diff] exact match in snippet view article find links to article
leading two-wheeled pony truck and, when designs were prepared at Salt River for a later order for more locomotives, the pony truck was replaced with a
GWR 3800 Class (1,145 words) [view diff] exact match in snippet view article find links to article
scrapyard locomotives including the Standard No. 4 Boiler, the pony truck wheel set, 2 x pony truck axle boxes, 4 x horn guides and 2 x eccentric sheaves from
South African Class 8D 4-8-0 (1,222 words) [view diff] exact match in snippet view article find links to article
leading two-wheeled pony truck. When designs were prepared at Salt River for a later order for more locomotives, the pony truck was replaced with a four-wheeled
South African Class 8 4-8-0 (1,381 words) [view diff] exact match in snippet view article find links to article
leading two-wheeled pony truck. When designs were prepared at Salt River for a later order for more locomotives, the pony truck was replaced with a four-wheeled
Steam locomotive components (2,575 words) [view diff] exact match in snippet view article find links to article
through the firebox (27) and along the boiler tubes (28).: 32  Pilot truck, Pony truck (US+) Leading bogie / Lead truck / Bissel truck (UK+) Wheels at the front
LNER Thompson Class A2/2 (1,696 words) [view diff] exact match in snippet view article find links to article
to Cowlairs to inspect No. 2001 Cock o' the North, which has a cracked pony truck, as well as Dundee to inspect No. 2002 Earl Marischal. Crank axle failures
CGR 1st Class 2-6-0 1891 (864 words) [view diff] exact match in snippet view article find links to article
splashers on the running boards to cover the tops of the wheels. The leading pony truck was of rather complex construction. The weight borne on the leading wheels
South African Class 8R 4-8-0 (727 words) [view diff] exact match in snippet view article find links to article
converted to a 4-8-0 Mastodon type wheel arrangement by replacing the leading pony truck with a bogie in a belated attempt to rectify one of the shortcomings of
NZR V class (958 words) [view diff] exact match in snippet view article find links to article
to the weakness in the frames, the frame of V 132 and a Nasmyth Wilson pony truck were recovered from the Bealey Quarry. It was intended that the locomotives
New South Wales Z25 class locomotive (670 words) [view diff] exact match in snippet view article find links to article
curves of the Blue Mountains line, it was decided to incorporate a Bissell pony truck on an improved version of the A93 class, previously known as B class.
Victorian Railways K class (3,587 words) [view diff] exact match in snippet view article find links to article
of the project, the pool consisted of the boiler, smokebox, funnel and pony truck from 159 and 177; the loco frames, coupled wheels, axle boxes, motion
SR E1/R class (351 words) [view diff] exact match in snippet view article find links to article
and water tanks enlarged at Brighton works over the next two years. A pony truck of the same design as a ’N’ class locomotive was also added to create
LNWR Class F (285 words) [view diff] exact match in snippet view article find links to article
of the Class B compound 0-8-0s with the simple addition of a leading pony truck between 1904–1908 to what would from 1911 become Class E. However, from
Forney locomotive (591 words) [view diff] exact match in snippet view article find links to article
developments included the introduction of locomotives with a leading pony truck, giving a 2-4-4 wheel arrangement. This was done to improve tracking ability
South African type FT tender (1,129 words) [view diff] exact match in snippet view article find links to article
with overhead laminated bearing springs, while the spring gear for each pony truck and two adjacent axles were compensated throughout the springing system
Barry Railway Class H (498 words) [view diff] exact match in snippet view article find links to article
braking. They were built as tank locomotives with an additional rear pony truck that allowed a greater coal and water capacity than that of the small
2-4-0 (1,664 words) [view diff] exact match in snippet view article find links to article
bunker capacity remained a drawback. The solution was to add a trailing pony truck to accommodate a larger coal bunker, converting them to a 4-4-2T wheel
Didcot Railway Centre (1,967 words) [view diff] exact match in snippet view article find links to article
preservationists had to conquer. The Standard No. 4 Boiler, pony truck wheel set, 2 pony truck axleboxes, 4 horn guides and 2 eccentric sheaves are being
GWR 5100 Class (701 words) [view diff] exact match in snippet view article find links to article
were rebuilt with 5 feet 6 inches (1.676 m) driving wheels and 3-foot pony truck wheels. They retained the number 2 boiler, but again pressed to 225 psi
GER Class 527 (513 words) [view diff] exact match in snippet view article find links to article
with a long barrel led to poor steaming and high coal consumption. The pony truck also gave problems. Hence, the earlier Johnson 0-6-0s were preferred.
LNER Thompson/Peppercorn Class K1 (855 words) [view diff] exact match in snippet view article find links to article
access to the cylinder steam chests and there were changes to the leading pony truck, the cylinder linings and the boiler. The new engines were also longer
GNR Class H3 (453 words) [view diff] exact match in snippet view article find links to article
the first design to incorporate Gresley's patented double swing link pony truck design. They were excellent mixed-traffic locomotives, but began to be
George Whale (1,264 words) [view diff] exact match in snippet view article find links to article
excessive front overhang: the principal change was the addition of a pony truck, making a 2-8-0; they remained as four-cylinder compounds, and between
BR Standard Class 8 (3,058 words) [view diff] exact match in snippet view article find links to article
these were not integrated into a cast combined sub-frame/pony truck pivot stretcher, the pony truck pivot stretcher being a fabrication. Had the planned batch
SECR N1 class (4,463 words) [view diff] exact match in snippet view article find links to article
Holcroft's solution was to move the mechanism to a position above the pony truck and ahead of the cylinders and link it to the outside valve rods with
SECR N1 class (4,463 words) [view diff] exact match in snippet view article find links to article
Holcroft's solution was to move the mechanism to a position above the pony truck and ahead of the cylinders and link it to the outside valve rods with
South African Class 20 2-10-2 (1,980 words) [view diff] exact match in snippet view article find links to article
The driving wheels were from scrapped Class 8 locomotives. The trailing pony truck was similar to that of the Class 19C, but the leading Bissel truck was
South African Class 21 2-10-4 (2,217 words) [view diff] exact match in snippet view article find links to article
with overhead laminated bearing springs while the spring gear for each pony truck and two adjacent axles were compensated throughout the springing system
South African Class 3 4-8-2 (1,708 words) [view diff] exact match in snippet view article find links to article
4-8-2. This time, however, Hendrie made full use of the potential of the pony truck under the cab to carry additional weight by positioning the firebox to
Hamilton railway station, Victoria (644 words) [view diff] exact match in snippet view article find links to article
nearby park: it is made up of K177's frames and coupled wheels, K174's pony truck and boiler, and K159's tender. "VICSIG - Infrastructure - Hamilton". www
Urbita Lake Railway (509 words) [view diff] exact match in snippet view article find links to article
with a diameter of 463 mm (18.23 inches) and two smaller wheels of a pony truck with the diameter of 254 mm (10 inches) onto the rails. The Vanderbilt
LNER P2 Class 2007 Prince of Wales (1,752 words) [view diff] exact match in snippet view article find links to article
simulation determined optimal coupled wheelset clearances and design of a pony truck with side-spring control. The original P2 cylinder diameter of 21 inches
South African Class NG15 2-8-2 (2,253 words) [view diff] exact match in snippet view article find links to article
parallel to the other three coupled axles at all times. This linking of a pony truck and coupled axle is known as a Krauss-Helmholtz bogie, an invention of
GWR 5600 Class (1,664 words) [view diff] exact match in snippet view article find links to article
to derail, so those driving them preferred them in reverse, where the pony truck was able to guide them around tight curves. When the first batch were
LNER Class P2 (2,638 words) [view diff] exact match in snippet view article find links to article
data for the P2 design and a modified design with a LNER Class V2 type pony truck was published in early 2013. The rail-dynamics software used was Resonate
Rhodesia Railways 16A class (246 words) [view diff] exact match in snippet view article find links to article
Internally they had long travel, long lap, valve gear, roller bearings on pony truck axles, separate boxes on most, and higher boiler pressure. This latter
S&DJR 7F 2-8-0 (1,338 words) [view diff] exact match in snippet view article find links to article
Compounds, with a Belpaire firebox and Walschaerts valve gear. A leading pony truck was added, to distribute the weight, making it a 2-8-0. The cylinders
Victorian Goldfields Railway (2,386 words) [view diff] exact match in snippet view article find links to article
9-year overhaul. During the overhaul the loco received new tyres on the pony truck and coupled wheels, a new smokebox barrel, cylinders re-bored, motion
Russian locomotive class Ye (2,898 words) [view diff] exact match in snippet view article find links to article
load on some axles to exceed 16 tonnes, it was decided to add a lead pony truck, thus turning it into a 2–10–0. This also allowed a slightly bigger boiler
American Locomotive Company (4,205 words) [view diff] exact match in snippet view article find links to article
a number of years. Trains portal List of ALCO diesel locomotives The pony truck affair Locomotives of India "American Locomotive Company Records". Finding
BR Standard Class 3 2-6-2T (1,308 words) [view diff] exact match in snippet view article find links to article
Standard Locomotive Owners Group (BRSLOG) including the pattern for the pony truck wheels. Tri-ang produced an OO Gauge model of the locomotive in BR Green
Moors Valley Railway (704 words) [view diff] exact match in snippet view article find links to article
on Sapper, with several improvements including outside frames and rear pony truck. Now features Walschaerts valve gear. 14 Horton 2-4-0 Lined Red 1991 It
2-8-0 (5,967 words) [view diff] exact match in snippet view article find links to article
under varying conditions, some trouble was experienced with the leading pony truck and it was dropped in favour of a four-wheeled bogie in later orders for
Cannon bearing (956 words) [view diff] exact match in snippet view article find links to article
for the LNWR used a cannon box. A radial axle is a form of single axle pony truck, where instead of a pivoted frame, the two axle bearings can slide sideways
4-8-0 (5,186 words) [view diff] exact match in snippet view article find links to article
converted to a 4-8-0 Mastodon wheel arrangement by replacing the leading pony truck with a bogie, and reclassified to the sole Class 8R. Because of the limited
LB&SCR K class (1,920 words) [view diff] exact match in snippet view article find links to article
motive power depot. Modifications were made to the suspension of the pony truck and to the smokebox layout before three further examples (Nos. 339-341)
Third rail (model rail) (1,509 words) [view diff] exact match in snippet view article
can also easily collect current from all of the driving wheels, or even pony truck wheels too. Early toy trains used two metal rail tracks like most real
Charles Collett (4,718 words) [view diff] exact match in snippet view article find links to article
the valley' direction, so that on the faster descending services, the pony truck helped to keep them stable. However, one story indicates that the development
Isle of Man Railway locomotives (8,391 words) [view diff] exact match in snippet view article find links to article
pony truck was kept at the end of Birkenhead Siding at Port Erin with No. 4 Try These chalked on it. Later relocated to Douglas yard, this pony truck
2-8-2 (8,553 words) [view diff] exact match in snippet view article find links to article
bogie, with the leading pair of driving wheels linked to the leading pony truck. The leading driving wheels had a limited amount of side play while the
SR Merchant Navy class (6,100 words) [view diff] exact match in snippet view article find links to article
A second "Mikado" locomotive design was planned to have a Helmholtz pony truck – a system already successfully applied on the Continent. However, both
Galena and Southern Wisconsin Railroad (1,474 words) [view diff] exact match in snippet view article find links to article
, 6 drivers (drive wheels) each 3 feet (0.91 m) in diameter, and one pony truck in front. This makes it a Mogul-type engine, with a 2-6-0 configuration
List of Ffestiniog Railway rolling stock (285 words) [view diff] exact match in snippet view article find links to article
the Festiniog Railway in 1963. Rebuilt as 2-4-0ST+T in 1972, with the pony truck from Moel Tryfan, an engine used on the original Welsh Highland Railway
LMS Stanier Class 8F (3,749 words) [view diff] exact match in snippet view article find links to article
injured.[page needed] Despite suffering a buckled main frame, fractured pony truck, and crushed cab, the locomotive – on loan to the Great Western Railway
GWR Cathedral Class (329 words) [view diff] exact match in snippet view article find links to article
the Hall Class and 1000 County Class that would come years later, same pony truck from the King Class 4-6-0s, different trailing bogie design coming from
List of rail accidents (1930–1939) (6,191 words) [view diff] exact match in snippet view article
its destination, just before 2200 hrs. Hitting a frozen switch, the pony truck on locomotive 1638 derails, turning the engine and tender over an embankment
Ravenglass and Eskdale Railway locomotives (5,914 words) [view diff] exact match in snippet view article find links to article
parts of it were incorporated into the River Mite of 1927. Its leading pony truck was reused under the rear of the Passenger Tractor of 1929 for many years
Castletown railway station (6,397 words) [view diff] exact match in snippet view article find links to article
cylinders, coal bunker, with a set of carriage wheels substituting for the pony truck. The locomotive had not been used in traffic since 1947 and was purchased